Disubstituted pyridines: the double-coupling approach

A one-pot procedure leading to disubstituted pyridines from the starting dibromopyridines is described. Key features include the ability to couple a range of aryl and even alkenylboronic acids at the 2,3 and/or 2,5 positions with excellent regiocontrol under a standard set of conditions. Further, isolated yields are greatly improved by the use of neutral alumina in place of silica for product purification. Finally, the intrinsic electronic bias of the pyridine ring can be overcome by using a bromoiodopyridine.     

Surface characterizations of spin-coated films of ethylcellulose and hydroxypropyl methylcellulose blends

Films of pure ethylcellulose (EC) and hydroxypropyl methylcellulose (HPMC) polymers and EC/HPMC blends were prepared from solutions by spin coating where isopropyl alcohol (IPA), water, and IPA/water cosolvent were used as solvents. Surface structures of the films were investigated using optical microscopy, atomic force microscopy (AFM), and Raman mapping and spectroscopy. For the films prepared from EC/HPMC blend solutions using the IPA/water cosolvent, different domain structures such as islands or pits and phase separation between EC and HPMC were observed by optical microscopy and AFM. The nature of the polymer components on the surface of the films was identified by Raman mapping and spectroscopy. Experimental results also indicated that polymer composition, solvent, and temperature during spin coating had significant impacts on surface structures of the films.     

Preparation and characterization of poly(lipid)-coated, fluorophore-doped silica nanoparticles for biolabeling and cellular imaging

The fabrication, characterization, and implementation of poly(lipid)-coated, highly luminescent silica nanoparticles as fluorescent probes for labeling of cultured cells are described. The core of the probe is a sol-gel-derived silica nanoparticle, 65-100 nm in diameter, in which up to several thousand dye molecules are encapsulated (Lian, W.; et al. Anal. Biochem. 2004, 334, 135-144). The core is coated with a membrane composed of bis-sorbylphosphatidylcholine, a synthetic polymerizable lipid that is chemically cross-linked to enhance the environmental and chemical stability of the membrane relative to a fluid lipid membrane. The poly(lipid) coating has two major functions: (i) to reduce nonspecific interactions, based on the inherently biocompatible properties of the phosphorylcholine headgroup, and (ii) to permit functionalization of the particle, by doping the coating with lipids bearing chemically reactive or bioactive headgroups. Both functions are demonstrated: (i) Nonspecific adsorption of dissolved proteins to bare silica nanoparticles and of bare nanoparticles to cultured cells is significantly reduced by application of the poly(lipid) coating. (ii) Functionalization of poly(lipid)-coated nanoparticles with a biotin-conjugated lipid creates a probe that can be used to target both dissolved protein receptors as well as receptors on the membranes of cultured cells. Measurements performed on single nanoparticles bound to planar supported lipid bilayers verify that the emission intensity of these probes is significantly greater than that of single protein molecules labeled with several fluorophores.     

Solvent dependent friction force response of polystyrene brushes prepared by surface initiated polymerization

Polystyrene (PS) brushes were prepared on oxide passivated silicon by the surface initiated polymerization (SIP) technique. From an AIBN-type free radical initiator, which was silanized and immobilized on silicon wafers, styrene brushes were directly polymerized and grafted from the surface. The formation of the initiator monolayer and, subsequently, the polymer brush on the surface were monitored by X-ray photoelectron spectroscopy (XPS) and ellipsometry. Friction force measurements were performed by atomic force microscopy (AFM), using a 5 microm SiO2 colloidal sphere tip and under systematically varied solvent environments (nonpolar to polar), to demonstrate the dependence of brush lubricity on solvation. The relative uptake of solvents in the PS brush was determined by quartz crystal microbalance (QCM), and it correlates well with friction data. It is surmised that, in poor solvent environments, the polymer brush exists in a collapsed conformation, giving rise to the higher observed friction response.     

Frequency dependence of gold nanoparticle superassembly by dielectrophoresis

Dielectrophoresis is an effective method for capturing nanoparticles and assembling them into nanostructures. The frequency of the dielectrophoretic alternating current (ac) electric field greatly influences the morphology of resultant nanoparticle assemblies. In this study, frequency regimes associated with specific gold nanoparticle assembly morphologies were identified. Gold nanoparticles suspended in water were captured by microelectrodes at different electric field frequencies onto thin silicon nitride membranes. The resultant assemblies were examined by transmission electron microscopy. For this system, the major frequency-dependent influence on morphology appears to arise not from the Clausius-Mossotti factor of the dielectrophoretic force itself, but instead from ac electroosmotic fluid flow and the influence of the electrical double layer at the electrode-solution interface. Frequency regimes of technological interest include those forming one-dimensional nanoparticle chains, microwires, combinations of microwires and nanoparticle chains suitable for nanogap electrode formation, and dense three-dimensional assemblies with very high surface area.     

Rapid proton-coupled electron-transfer of hydroquinone through phenylenevinylene bridges

We describe the synthesis of two oligo(phenylene vinylene)s (OPVs) with a hydroquinone moiety and a thiol anchor group: 4-(2',5'-dihydroxystyryl)benzyl thioacetate and 4-[4'-(2' ',5' '-dihydroxystyryl)styryl]benzyl thioacetate. Monolayers on gold of these molecules were examined by electrochemical techniques to determine the electron transfer kinetics of the hydroquinone functionality (H2Q) through these delocalized tethers ("molecular wires") as a function of pH. Between pH 4 and 9, rate constants were ca. 100-fold faster than for the same H2Q functionality confined to the surface via alkane tethers. Also, in this same pH range rate constants were independent of the length of the OPV bridge. These new electroactive molecules in which the hydroquinone functionality is wired to the gold surface by means of OPV tethers should be useful platforms for constructing bioelectronic devices such as biosensors, biofuel cells, and biophotovoltaic cells with a fast response time.     

Stable analogs of the uranyl ion containing 1,1,3,3-tetramethylguanidine

The reaction of 1,1,3,3-tetramethylguanidine (HTMG) with [UO(2)Cl(2)(THF)2] yielded [UO(2)Cl(2)(HTMG)2] 1, the first uranyl tetralkylguanidine adduct reported, further investigation led to the synthesis of [UO(2)(DBP)2(HTMG)2] 2 and [UO(2)(DBP-4-Me)2(HTMG)2] 3 via the reaction of [UO(2){N(SiMe(3))2}2(THF)2] with HTMG and the appropriate aryl alcohol, HO-2,6-(t)Bu(2)-4-RC(6)H(2) (R = H, DBP; R = CH(3), DBP-4-Me).     

Spectrum analysis of seismic surface waves and its applications in seismic landmine detection

In geophysics, spectrum analysis of surface waves (SASW) refers to a noninvasive method for soil characterization. However, the term spectrum analysis can be used in a wider sense to mean a method for determining and identifying various modes of seismic surface waves and their properties such as velocity, polarization, etc. Surface waves travel along the free boundary of a medium and can be easily detected with a transducer placed on the free surface of the boundary. A new method based on vector processing of space-time data obtained from an array of triaxial sensors is proposed to produce high-resolution, multimodal spectra from surface waves. Then individual modes can be identified in the spectrum and reconstructed in the space-time domain; also, reflected waves can be separated easily from forward waves in the spectrum domain. This new SASW method can be used for detecting and locating landmines by analyzing the reflected waves for resonance. Processing examples are presented for numerically generated data, experimental data collected in a laboratory setting, and field data.     

Dolphin (Tursiops truncatus) echoic angular discrimination: effects of object separation and complexity

A bottlenose dolphin was tested on its ability to echoically discriminate horizontal angular differences between arrays of vertically oriented air-filled PVC rods. The blindfolded dolphin was required to station in a submerged hoop 2 radial m from the stimuli and indicate if an array with two rods (S+) was to the right or the left of a single rod (S-). The angular separation between the two rods (thetaw) was held constant within each experiment while the angle between the S+ and the S-stimuli (thetab) varied to produce angular differences (deltatheta= thetab-thetaw) ranging from 0.25 to 4 degrees. In experiment I, thetaw was maintained at 2 degrees and in experiment II, thetaw was maintained at 4 degrees. Resulting 75% correct thresholds (method of constant stimuli) were 1.5 and 0.7 degrees, respectively. The two main findings of this study are: (1) decreasing the number of targets does not aid in localization, and (2) increasing the space between the rods enhances localization. Taken as a whole, the experiments suggest dolphins have a well-developed ability to resolve spatial information through sonar.     

The impact of residence time on ignitability and time to ignition in a toroidal jet-stirred reactor

Understanding of ignition processes is central to design for reliable and safe aerospace combustor systems. Ignition is influenced by many factors including combustor geometry, flow conditions, fuel composition, turbulence intensity, ignition source, and energy deposition method. A toroidal jet-stirred reactor (TJSR) utilizes bulk fluid motion, presence of recirculation zones, a bulk residence time, and turbulence intensities which emulate characteristics relevant to cavity stabilized and swirl stabilized combustors. In this work, a TJSR was used to quantify ignitability and time-to-ignition of premixed ethylene and air. The effects of inlet temperature, residence time, and reactivity were studied on forced ignition processes. Experimental conditions ranged from residence times of 15–35?ms, mixture temperatures of 340–450?K, and equivalence ratios of 0.5–1 using capacitive spark-discharge ignition. The minimum equivalence ratio for ignition (MER), or the equivalence ratio at 50% probability, shows an inverse relationship with mixture temperature and residence time. Prior theory of real engine combustor performance for lean light off, proposed by Ballal and Lefebvre, was compared to the MER and displayed similar trends to the model. Spatially integrated OH* chemiluminescence was used to measure time to ignition within the reactor. Reduction in ignitibility was experienced as the time-to-ignition approached the residence time stressing the importance of device flow time scales in relation to kernel growth dynamics and ignition probability.